5G providers can’t succeed with out versatile, environment friendly, and programmable transport. To assist and capitalize on 5G providers, 5G RAN transport architectures have advanced to assist virtualization and slicing, strict latency, jitter, stringent synchronization, and multi-cloud interconnect architectures. Current Cisco improvements have targeted on section routing and IPv6 to enhance community reliability with visitors engineering and to simplify community complexity with programmable transport, offering 5G transport operators with extra management and the flexibility to construct performance-based service degree agreements (SLAs).
SRv6 microSID for converged private and non-private 5G
A virtualized radio entry community (RAN) structure permits operators to quickly and flexibly allocate sources throughout private and non-private 5G deployments. To speed up time to market and bridge the talents hole, communication service suppliers (CSPs) are selecting to deploy their providers in partnership with hyperscale cloud suppliers (HCPs). Moreover, as knowledge facilities transfer from centralized to distributed to extend protection and cut back potential efficiency points with cloud-based providers, an agile and scalable transport community is important as a part of a hybrid or multi-cloud technique.
Versatile service placement requires visitors engineering and end-to-end service high quality assurance from the transport community. As effectively, transport slicing is important to keep up assured service high quality and supply RAN service differentiation.
Slice consciousness between the radio and the 5G core community is addressed by 3GPP specs. To pick probably the most optimum person aircraft perform (UPF) calls for, the underlying transport community should even be slice conscious. Particular slice traits are depending on the underlay 5G transport and the way it allocates sources. The community can examine slice info just like the VLAN or ethernet header, classify the radio visitors to totally different slices, and allocate transport sources to satisfy various ranges of service from latency delicate to greatest effort.
SRv6 excels when the community has many interconnected finish factors and complicated visitors engineering necessities. It brings programmability to the 5G transport structure. The packet processing program is expressed as an inventory of directions that are represented as 128-bit segments referred to as section identifier (SID). In complicated visitors engineering, there are situations which will require carrying a number of segments within the IPv6 packet headers. Decreasing this overhead is helpful to attenuate the packet most switch unit (MTU) and allow SRv6 on legacy {hardware} gadgets with restricted processing capabilities.
The microSID (uSID) introduces extensions to the SRv6 programming mannequin with every 16-byte SID capable of carry micro-instructions referred to as uSID. uSID are represented with two bytes, and as much as six uSIDs will be carried in a SID.
SRv6 uSID advantages
With SRv6 uSID, the community will be programmed to deal with complicated situations with simplicity. This extra programmability comes with a number of benefits:
- No change to SRv6 management aircraft, knowledge aircraft, or section routing header (SRH)
- Any SID within the SID record can carry a uSID
- An SID can carry as much as six program directions
- No routing extension required to assist
The result’s an ultra-scalable community capable of assist multi-domain deployments with minimal MTU overhead.
SRv6 microSID and O-RAN ALLIANCE Plugfest
Cisco partnered with Keysight Applied sciences to efficiently validate O-RAN ALLIANCE-specified 5G RAN visitors on an SRv6 microSID-based programmable 5G xHaul transport community. Site visitors traits like latency, jitter, synchronization, and community convergence have been measured for every service slice over a multihop ring topology structure.
Within the validation check, latency delicate fronthaul management aircraft visitors was carried with an SRv6-uSID-based L2 transport slice over EVPN. Non-latency delicate administration visitors was carried with an SRv6 uSID-based L3 transport slice over L3VPN. Synchronization was offered by an aggregation router to all nodes together with radio models and distributed models. The Keysight Novus tester was used to simulate a number of radio models and distributed models, whereas the Keysight Metronome Timing System (MTS) was used to measure synchronization accuracy and relative timing.
SRv6 microSID directions programmed the community to make sure service assurance for every slice and visitors kind with the next outcomes:
- Latency delicate slice: 11us and common jitter of ~600ns
- Non-latency delicate slice: 28ns
- Relative timing accuracy between radio nodes: <30ns relative |TE|
- Service convergence throughout transport hyperlink failure: <22ms
These outcomes affirm that the 5G xHaul structure with SRv6 microSID meets all traits outlined by eCPRI, O-RAN, ITU-T, and 3GPP requirements for fronthaul, midhaul, and backhaul visitors over converged multihop transport structure.
Conclusion
SRv6 microSID is an open standards-based resolution that many service suppliers have already deployed of their community and are realizing the advantages of such innovation. The Cisco Converged SDN Transport structure and the scalable SRv6 connects cell customers, gadgets, sensors, utility workloads, and cloud providers to allow CSPs to handle complicated community interconnects and undertake a hybrid cloud structure to supply differentiated providers.
Extra Assets:
O-RAN ALLIANCE Plugfest Validation of WG9 xHaul with Keysight
MPLS WC 2022 – Rakuten: SRv6 uSID in Deployment to Ship Finish-to-end 5G Community Slicing
Share:
