Thursday, November 23, 2023
HomeIoTJoe Scotto's Newest Hand-Wired Keyboard Is the Extremely-Skinny But Screw-Wealthy ScottoWing

Joe Scotto’s Newest Hand-Wired Keyboard Is the Extremely-Skinny But Screw-Wealthy ScottoWing



Do-it-yourself keyboard fanatic Joe Scotto is again with a brand new design, and it is an fascinating tackle an ergonomic format in an ultra-thin chassis — held along with a powerful 96 screws.

“This board is the ScottoWing,” Scotto says of his newest keyboard construct, “which is my thinnest hand-wired keyboard but measuring roughly lower than 20mm [around 0.79 inches] tall. It is utilizing Choc Silver [switches] due to their clear housing which completely pairs with the resin printed keycaps.”

Contained in the unusually slim housing is a Waveshare RP2040-Zero, a low-cost microcontroller board based mostly on Raspberry Pi’s dual-core RP2040 chip — although Scotto notes the design can be appropriate with an Arduino Micro or Raspberry Pi Pico footprint. Every swap is wired with a typical floor then to the RP2040-Zero, which acts because the controller and offers USB connectivity for the keyboard.

The unusually-thin housing did convey some challenges, nonetheless, together with an undesirable flex throughout typing. Scotto solved this in an fascinating, if uncommon, manner: including screws. Numerous screws. “One factor you in all probability discover is what number of screws the board has, that was each a stylistic and performance alternative,” the maker explains. “As a result of it is so skinny, the plate flexes loads. Utilizing 48 stand-offs with 96 screws was the answer to this.”

That is removed from Scotto’s first foray into hand-wired keyboard designs. Earlier creations embody a two-part break up keyboard which makes use of a single microcontroller and a repurposed VGA cable as an interconnect, the one-piece ScottoErgo with rugged USB connector, a one-handed keyboard designed to sub in for the discontinued Frogpad, and a Raspberry Pi RP2040-based gadget which is definitely a not-so-secret mouse. All have one factor in frequent: their switches are related utilizing direct wiring, with no underlying printed circuit board.

As with Scotto’s earlier board designs, the information for the ScottoWing have been launched on GitHub beneath the reciprocal Inventive Commons Attribution-NoCommercial-ShareAlike 4.0 license; extra data is accessible on Scotto’s web site.



Supply hyperlink

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -
Google search engine

Most Popular

Recent Comments